JSB3 Official “MATE” Light Stick Ver.2

The JSB3 Official "MATE" Light Stick Ver.2 features a fantastical design motif, resembling a rose, the symbol of "MATE", reflected within a diamond.
The fantastical glow emanating from its translucent body resonates with the stage, enveloping the entire venue in a sense of unity.
Let's make the special time shared between "MATE" members and J SOUL BROTHERS III even more vibrant with this evolved light stick.

※This packaging is for product protection only. Please note that we cannot replace products due to damage to the packaging.

▼Instructions for updating the firmware of the JSB3 Official "MATE" Light Stick Ver.2
Due to fine-tuning of the light color balance, please update the firmware to the latest version via the "MATE" Light Stick app.
For detailed instructions on how to update the firmware, please check the URL below.
https://app.pikabon.com/ja/jsb3-light-firmware

※Even without the update, the seat synchronization will work, but there may be slight differences in the color of the lights.

■Regarding JSB3 Official "MATE" Light Stick Ver.2
・Due to stage production requirements, we may decline to use this at certain events.
・For『J SOUL BROTHERS III PRESENTS "JSB LAND ~FOREVER~"』, we are planning to use wireless control for the stage production.
　To use the light stick, you will need to register your seat information. Please install the smartphone app and register your seat information.

※Due to production requirements, bringing in any penlights other than 「JSB3 Official "MATE" Light Stick Ver.2・JSB3 Official "MATE" Light Stick・OFFICIAL FLAG LIGHT/J SOUL BROTHERS III ver.」is prohibited.

▼Click here for information about the JSB3 Official "MATE" Light Stick app▼
https://app.pikabon.com/ja/jsb3-light

■Contents
OFFICIAL LIGHT STICK, Instruction manual

■Battery
Included / Uses 3 AAA alkaline batteries

■Product specifications
・Operating voltage: 4.5V
・Wireless frequency: 2.4GHz
・Operating time: Approximately 5 hours

■Product features and usage
・The JSB3 Official "MATE" Light Stick Ver.2 features wireless control functionality.
・Press the button on the stick itself to turn it on.
・LED mode settings: White (On) → Orange → Purple → Yellow → Green → Pink → Red → Blue → OFF
・Press and hold the button for 3 seconds to switch to「Bluetooth mode」and the light will blink blue. (Please enter seat information in this mode.)
・Press and hold the button again for 3 seconds in「Bluetooth mode」to switch to「Performance mode」. (Please be sure to switch to this mode during performances.)

■How to insert and replace batteries
1. After turning the handle on the bottom, remove the internal battery socket.
2. Insert 3 AAA batteries into the battery socket.
(Check the positive and negative terminals. The side with the spring is the negative terminal, and the side without the spring is the positive terminal.)
3. After inserting the battery socket, rotate the bottom cap in the direction of the arrow.
(Please note that inserting the battery socket upside down may prevent the product from working and could cause malfunction.)

■Precautions for handling
・Avoid high temperatures and humidity; store at room temperature.
・Avoid looking directly at the LED light at close range.
・Do not disassemble, subject to strong impacts, or use in water or near open flames. This may cause product malfunction.
・Always use new alkaline AAA batteries when replacing batteries.
　Using other types of batteries (such as manganese batteries) may cause malfunction or failure.
・When replacing batteries, replace all 3 batteries.
・When storing the product, remove the batteries to prevent damage from battery leakage.
・Keep batteries out of reach of infants and young children.
・Dispose of expired batteries according to the designated disposal method.
・Always check the「positive (+)」and「negative (-)」terminals of the batteries before inserting them in the correct direction.
　(Incorrect installation may cause product malfunction and may lead to fire or burns.)
・If the batteries suddenly become hot during use, immediately remove them and contact the penlight support desk located within the venue or the contact number provided.
・If the penlight suddenly becomes uncontrollable or the red light remains lit during the performance, the batteries are depleted, so please replace all 3 batteries with new ones.
・We recommend replacing the batteries with new ones before each performance.
・Occasionally, there may be interference from radio waves used in the performance, but this is not a malfunction.

Material
PC, ABS

Size
W approx. 10.2cm x D approx. 10cm x H approx. 22.3cm

Weight
339g

EMS postage
https://www.post.japanpost.jp/int/charge/list/ems_all_en.html